WatercolorGear™ Products

Being an avid plein air watercolor painter myself, I have experience with what actually works in the field: Gear that is sturdy, compact, easy to use – and compatible with other equipment that you might already own.

WatercolorGear™ was designed as ergonomic field gear for plein air watercolor artists. It is the lightest plein air field gear available.
It is also suitable for use in the studio.

WatercolorGear’s ThirdArm platform holds your painting supplies to the side of your tripod in easy reach of the hand you use to paint.
The WatercolorGear™ line includes its unique Revolution easel with built-in diffuser that shields your watercolor paper from light interference.
The line includes two additional more traditional style easels, Enabler easel and Enabler with Ledge.

Third Arm clamps to your tripod and holds your painting supplies in an ergonomic position to your painting hand
Price $225.00

  • ThirdArm clamps anywhere on the leg or center column of your tripod or any stationary, round or flat surface that is between .24” to 1.38”
  • ThirdArm weighs only 1.5 lbs.
  • The 12″ x 12″ aluminum composite platform holds all your painting supplies
  • ThirdArm packs to 12″ W x 14.5″ L and fits in the laptop sleeve of most backpacks
  • ThirdArm wipes clean
  • ThirdArm is extremely versatile (learn more about this unique feature here)
  • Tripod NOT included

Revolution with built-in diffuser holds your watercolor paper to your tripod while shielding your paper from unwanted light interference
Price $125.00

Revolution easel with built-in diffuser avenges dappled light or blasting sun and has saved the day when caught in rainy conditions, too.
In wind it works better than an umbrella and is much easier to pack and carry.

  • Revolution with built-in diffuser and attached Enabler connector
    fits any standard 1/4″ – 20 tripod
    quick release mount
  • The diffuser mode works on 1/4 sheets of watercolor paper or smaller
  • Revolution is made with 6 mm fluted polypropylene and aluminum fittings including a ledge, diffuser lifter, and stabilizer for 1/2 page work area
  • Revolution closes flat to carry and measures 12.25″ x 15.75″ closed;
    Unfolds to 15.75″ x 23.75″
  • Extremely lightweight and portable,
    Revolution weighs only 1.02 lbs
  • Tripod NOT included

Without the diffuser function,
Revolution unfolds to hold up to a ½ sheet in either landscape or portrait mode

When open and without diffuser function, Revolution provides a work area that is 15.75″ x 23.75″ to directly tape or clip your watercolor paper

Revolution can hold any size paper on separate supports resting on the attached ledge allowing you to paint on more than one painting without removing any paintings from the supports

We recommend clipping the support to the Revolution using the included closure clip
(Separate supports not included)

Because of Revolution’s versatility, it is the only easel you will need
keeping your field gear lightweight and manageable
Revolution is NOT effective against light from behind and may take positioning of your easel to completely block unwanted light on your paper, depending on the angle and direction of light

WatercolorGear™ Enabler easels are traditional supports for your watercolor paper and come in two models:

Enabler connects to your tripod’s quick release with the attached Enabler connecter. Clip or tape a 1/4 sheet of watercolor paper directly to the Enabler
Price $49.00

  • Attach Enabler’s connector to a standard 1/4″ – 20 tripod quick release mount for easy set-up of your Enabler on any tripod (Tripod Not Included)
  • Tape or clip your 1/4 sheet watercolor paper to the front of your Enabler
  • Enabler weighs .425 lbs – WatercolorGear’s lightest model
  • Made of fluted polycarbonate – Enabler is lightweight yet durable!
  • Tripod NOT included

Enabler with Ledge is identical to the above Enabler but includes a bottom ledge capable of holding separate supports for your watercolor paper
Price $61.00

The Ledge allows more flexibility to paint on larger sizes of paper and to work on more than one painting without removing your painting from the support

You can attach your 1/4 sheet paper or smaller directly to the Enabler with Ledge

Enabler with Ledge measures 11.875″ x 15.875″ with a 1/2″ metal bottom ledge

Tripod and supports NOT included

Recommended Tripod/ NOT included
Use the tripod of your choice for WatercolorGear which fits most standard tripods
Specifications:
ThirdArm will attach to any tripod with center column or leg diameter 1.38″ or smaller
Revolution and both Enabler easels fit a standard 1/4″ – 20 tripod quick release mount

I use and like the Benro Slim Aluminum Tripod which weighs 2.6 lbs and packs to 12.9″
This tripod is moderately priced and available here with free shipping.
Together, Revolution and ThirdArm weigh a mere 2.52 lbs and provide incomparable portability and flexibility when painting on location. When used with a lightweight tripod like the Benro Slim Travel tripod (NOT included), the entire set-up weighs 5.12 lbs.

To order WatercolorGear™ products email contact@watercolorgear.com with the items you wish to purchase. Please give your full name*, mailing address, and indicate whether you paint with your right or left hand.**
We will send you a PayPal invoice. Once we receive your payment in full through PayPal,
we will ship our products by UPS ground. Shipping within the contiguous US is included on orders over $100.

*Your personal information will never be shared with anyone
**WatercolorGear™ products are ergonomically designed to support your painting-hand

Questions? contact@watercolorgear.com

For a limited time, sign in below and receive an “early adopter” discount
of 20% to 25% off WatercolorGear™ products

Sign up now and receive an “early adopter” discount as WatercolorGear™ launches . . .